The NightSnipe NS550 Adjustable Beam Hunting Light™ is the top extreme range hunting rifle light on the market today. Whether you use a bolt-action hunting rifle, tactical rifle, modern sport rifle or shotgun, our hunting light will provide you with the visibility you need to hunt way after the sun goes down. These high powered green, white and red CREE LED lights have a highly effective range and are the best value and highest quality on the market!
For the NightSnipe NS550 / 550 Extreme in red, Green, White and the NightSnipe NS550 IR (Infrared Illuminator)
We at Predator Hunter Outdoors designed a dimmer slide that is like no other!
Unlike other dimmer switch dials that require the user to use two fingers to operate, our new SLIDE dimmer can be fully operated with just the push of your thumb in a NATURAL shooting position. This allows the hunter to keep his NORMAL hand position grip on the rifle for optimal accuracy and performance.
We took a deep look into how we could improve the current designs of most dimmers available in the marketplace. 99% of dimmer switches out will emit at least 10% light when you turn the dimmer / light on. This can often times be a disadvantage to the hunter as they have no control over the 10% of light other then actually turning the light back off. As we all know, predator hunting can and often times is a very fast paced, seconds to prepare and take the shot sport. This is especially true when hunting at night. There’s allot going on and having to worry about turning your dimmer switch on and off should not be one of them!
Our all new designed dimmer allows the hunter to actually turn their dimmer switch on at the start of the set and have NO light being emitted from the light! This allows the hunter to focus on calling, watching for game, and prepare for the shot. When the game appears, all you have to do is simply slide your dimmer dial forward and emit from 1-100% light. This is extremely important in staying undetected all while seconds away from being ready to take the shot!
Feed that Night vision scope the optimal amount of IR Light!!!
Also available for the NS550 / 550 Extreme IR (Infrared Illuminator). Most IR lights available are either a 1 mode, (high) or a 3 mode, (Low/Medium/High). Night vision scopes can be very picky on the amount of IR light they prefer for different hunting situations to reach the optimal viewing picture. To little light and your target isn’t being illuminated to it’s full potential. To much IR light will result in a complete white washout of your picture resulting in loosing your target in the scope.
The all new NS550 Extreme IR led and dimmer allows the hunter to use the exact amount of IR light for picture perfect illumination. From 1-100% IR light illumination means there is no other IR illumination / dimmer quite like it!
NOTE: The new NS550 dimmer switch REQUIRES the all new DIMMER specific LED. The dimmer will NOT work with existing NS550 / NS550 Extreme LED’s. You must purchase the New dimmer led to fit your current NS550 / NS550 Extreme Hunting Light.
A dimmer system like no other!! Get yours today or upgrade your existing NS550 / NS550 Extreme to the all new NS550 Extreme Dimmer!!
Designed and Engineered in the USA by Predator Hunters for Predator Hunters!
Comes standard with:
- The NightSnipe NS550 Adjustable Beam Light.
- EXCLUSIVE, Industry leading hard plastic NightSnipe carrying case with protective foam cutout insert.
- 1 x Universal AC/DC home or car charger.
- 2 x Rechargeable, 10-year rated Lithium Ion batteries (18650, 3.7 volt, 2400+ mAh).
- 1 x Push button on/off tailcap.
- 1 x Coiled dimmer slide switch tail cap.
- 1 x NightSnipe Adjustable Mount System.
- 1 x Interchangeable extreme powered 100,000 hour CREE DIMMER led available in your choice of green, red, white and IR (Infrared).
- DIMMER KITS DO NOT COME WITH BATTERY EXTENSION TUBE. THE LED AND DIMMER ARE DESIGNED TO BE OPERATED WITH ONE BATTERY ONLY.
NEW Mount System:
Just like mounting a rifle scope, keeping your light as close as possible to your scope / weapon is crucial for maximum performance. Having to high of a mount will result in improper beam placement and insufficient adjustments that will not allow your tightly focused light beam to be centered in your scope and on your intended target. In addition to improper beam placement or lack of overall adjustment, the adjustment knobs on 99% of similar mounts are too small and become seized up very quickly leaving you with a now nonadjustable mount.
A great majority of the adjustable mounts available in the market are very low quality builds. They lack precise CNC machining, quality internal components such as springs, ball bearings and other crucial parts that make up the mounts. We have also found that most of the mounts do not fit the light tubes properly due to improper hole / screw placement, hole depth and sloppy engineering of the mount ring.
We engineered our adjustable mounts in the same fashion as our lights, tight, fluid like and precise adjustments for pinpoint accuracy. Not only did we improve the overall CNC machining of the mounts we also increased the ball bearing diameters, springs and travel adjustments to ensure a full range of adjustment both vertical and horizontal.
We also increased the overall size of the adjustment knobs for easier finger placement and quicker adjustments. Additionally, we increased the size of the main mounting nut for easier mounting and removing of your light / mount from the picatinny rail.