ATTENTION!!!! This is an IR (Infrared) Illuminator kit. This is for night vision scopes only!! The IR light is not visible to the human eye. Please choose another NightSnipe NS550 Extreme kit if your looking for a red, green or white led light.
Here it is folks! A dimmer IR Illuminator kit like no other!! Feed that night vision scope as much or as little IR light it needs for the perfect amount of Illumination on every set!!
The only dimmer slide of it’s kind!!
The all new NightSnipe NS550 EXTREME Dimmer Slide Switch! (Patent Pending)
For the NightSnipe NS550 / 550 Extreme IR (Infrared Illuminator)
We at Predator Hunter Outdoors designed a dimmer slide that is like no other! With 1000+ yards of illumination, nothing beats the NS550 Extreme IR Illuminator!
Unlike other dimmer switch dials that require the user to use two fingers to operate, our new SLIDE dimmer can be fully operated with just the push of your thumb in a NATURAL shooting position. This allows the hunter to keep his NORMAL hand position grip on the rifle for optimal accuracy and performance.
We took a deep look into how we could improve the current designs of most dimmers available in the marketplace. 99% of dimmer switches out will emit at least 10% light when you turn the dimmer / light on. This can often times be a disadvantage to the hunter as they have no control over the 10% of light other then actually turning the light back off. As we all know, predator hunting can and often times is a very fast paced, seconds to prepare and take the shot sport. This is especially true when hunting at night. There’s allot going on and having to worry about turning your dimmer switch on and off should not be one of them!
Our all new designed dimmer allows the hunter to actually turn their dimmer switch on at the start of the set and have NO light being emitted from the light! This allows the hunter to focus on calling, watching for game, and prepare for the shot. When the game appears, all you have to do is simply slide your dimmer dial forward and emit from 1-100% light. This is extremely important in staying undetected all while seconds away from being ready to take the shot!
Most IR lights available are either a 1 mode, (high) or a 3 mode, (Low/Medium/High). Night vision scopes can be very picky on the amount of IR light they prefer for different hunting situations to reach the optimal viewing picture. To little light and your target isn’t being illuminated to it’s full potential. To much IR light will result in a complete white washout of your picture resulting in loosing your target in the scope.
The all new NS550 Extreme IR led and dimmer allows the hunter to use the exact amount of IR light for picture perfect illumination. From 1-100% IR light illumination means there is no other IR illumination / dimmer quite like it!
NOTE: The new NS550 dimmer switch REQUIRES the all new DIMMER specific LED. The dimmer will NOT work with existing NS550 / NS550 Extreme LED’s. You must purchase the New dimmer led to fit your current NS550 / NS550 Extreme Hunting Light.
A dimmer system like no other!! Get yours today or upgrade your existing NS550 / NS550 Extreme to the all new NS550 Extreme Dimmer!!
Predator Hunter Outdoors is excited to announce our new line of Infrared Illuminators all designed to boost and enhance your current night vision setup with improved clarity and extreme distances! With a variety of different models and kit packages available, units were designed to suit the needs of every hunter for every hunting situation. Whether it be a weapon rail mount, scope mount, binocular or monocular, we have a mount system to accompany any of our Infrared Illuminator units. With maximum performance, innovative design and an industry leading warranty- Predator Hunter Outdoors line of Infrared Illuminators will Keep you Hunting After the Sun Goes Down!!! Be sure to check out our even better deals on Photon / ATN / NightSnipe Infrared Illuminator packages!
The NS-550 (67 mm objective) IR Illuminator by Predator Hunter Outdoors is one of the most powerful illuminators on the market yet is still compact, lightweight and usable on any night vision setup. Greatly improve the clarity and distance capabilities of your current night vision equipment with this powerful and compact illuminator. A must for anyone looking to get the most of their night vision equipment.
Designed and Engineered in the USA by Predator Hunters for Predator Hunters!
Comes standard with:
- The NightSnipe NS550 Extreme Adjustable Beam Light.
- EXCLUSIVE, Industry leading hard plastic NightSnipe carrying case with protective foam cutout insert.
- 1 x Universal AC/DC home or car charger.
- 2 x Rechargeable, 10-year rated Lithium Ion batteries (18650, 3.7 volt, 2400+ mAh).
- 1 x NEW NightSnipe Dimmer Slide Switch
- 1 x NightSnipe Adjustable Mount System.
- 1 x Interchangeable extreme powered 100,000 hour CREE DIMMER led in 850NM IR (Infrared).
- DIMMER KITS DO NOT COME WITH BATTERY EXTENSION TUBE. THE DIMMER LED AND SWITCH ARE DESIGNED TO OPERATE WITH ONE BATTERY ONLY.
- Adjustable beam allows the user to fine tune the illuminator to their specific situation. From flood to tight pencil beam when extreme distance shots are needed.
- NEW Dimmer Slide Switch allows you too feed your Night Vision setup from 1-100% IR illumination for the perfect amount of IR illumination for every setup!
- 850NM (1070MW)
- Compatible with generation 1, generation 2, generation 3, and ALL digital night vision devices.
- 18650 rechargeable batteries.
- Numerous mounting options available for AR rails, scopes, binoculars and monocular.
- Available in kit form (18650 rechargeable batteries, battery charger with home and car plugs, customer selected mounting options, custom Flambeau case) or the light by itself.
- Industry Leading Warranty
NEW Mount System:
Just like mounting a rifle scope, keeping your light as close as possible to your scope / weapon is crucial for maximum performance. Having to high of a mount will result in improper beam placement and insufficient adjustments that will not allow your tightly focused light beam to be centered in your scope and on your intended target. In addition to improper beam placement or lack of overall adjustment, the adjustment knobs on 99% of similar mounts are too small and become seized up very quickly leaving you with a now nonadjustable mount.
A great majority of the adjustable mounts available in the market are very low quality builds. They lack precise CNC machining, quality internal components such as springs, ball bearings and other crucial parts that make up the mounts. We have also found that most of the mounts do not fit the light tubes properly due to improper hole / screw placement, hole depth and sloppy engineering of the mount ring.
We engineered our adjustable mounts in the same fashion as our lights, tight, fluid like and precise adjustments for pinpoint accuracy. Not only did we improve the overall CNC machining of the mounts we also increased the ball bearing diameters, springs and travel adjustments to ensure a full range of adjustment both vertical and horizontal.
We also increased the overall size of the adjustment knobs for easier finger placement and quicker adjustments. Additionally, we increased the size of the main mounting nut for easier mounting and removing of your light / mount from the picatinny rail.
Mount can be used with the included picatinny rail ring mount for mounting on the top of the Photon, or any existing picatinny rail.